How the Automatic Fire Protection Ball Works
The fire ball is a sealed shell filled with ABC dry chemical powder, with a heat-sensitive fuse built into its surface. When flames touch it, the fuse ignites, the ball bursts and the powder is spread over the fire – with a loud bang that warns everyone nearby.
Step by step
-
Install
Place the ball on a shelf, stand or wall bracket close to where a fire is likely to start – such as an electrical panel, kitchen or stock area.
-
Detect and burst
When flames reach the ball, the fuse in its shell ignites on direct contact and within a few seconds a small activation charge bursts the shell. The burst is very loud – about 138 dB in testing – and works as a fire alarm. Normal room heat, smoke or sunlight do not trigger it.
-
Suppress
ABC dry chemical powder spreads over the fire, smothering the flames and interrupting the burning process.
Two ways to use it
Automatic (passive) use: mounted near a fire risk, the ball waits. If a fire starts – even at night or when the premises are locked – the flames reach the ball and it activates on its own.
By hand (active) use: if you see a small fire starting, roll or toss the ball into the base of the flames from a safe distance. It activates when it touches the fire. There are no pins to pull and nothing to aim.
What the powder does
The ball contains ABC dry chemical powder made mainly of mono-ammonium phosphate (about 90%), conforming to Indian Standard IS 14609. This is the same family of powder used in many standard ABC fire extinguishers.
The powder smothers the flames by cutting them off from oxygen and interrupting the chemical reaction of the fire. On burning wood, paper and cloth it forms a coating that helps stop the material from re-igniting. It does not conduct electricity, so it can be used on fires in electrical equipment.
After a fire ball has gone off
- Make sure the fire is completely out. If there is any doubt, call 101 (Fire) or 112.
- Switch off the electricity supply to the affected area if it is safe to do so.
- Open doors and windows to clear the powder from the air. Avoid breathing the dust; rinse eyes with water if needed.
- Sweep or vacuum up the powder and dispose of it as per local rules.
- Find and fix the cause of the fire – for example a faulty wire or overloaded socket.
- Replace the used fire ball. Contact SS Enterprises for a replacement.
Know its limits
A fire ball is meant for small fires at an early stage within its reach. It will not put out a large, fully developed fire. It is an additional safety measure and does not replace fire extinguishers, alarms or sprinklers. If a fire keeps growing, leave the building and call 101.
Protect your shop, godown or home today
Call or WhatsApp SS Enterprises for price, bulk orders and help choosing the right places to install fire balls.